Skip to content
Inception | Designs
Toggle mobile menu
BODY KITS / PARTS
BODY KIT WALL
LEGACY BODY KITS
PUMP / SNIPER
FLE HINGE FRAME
FLE SLIDE FRAMES
THE GUN WALL
BUILD YOUR OWN KITS
EMEK | MG100
EMEK | STANDARD
OILS AND LUBRICANTS
SEALANTS AND THREAD LOCKERS
PUMP ARMS FOR AUTOCOCKERS
PUMP ARMS FOR PUMP GUNS
HATS AND BEANIES
Want to build your own custom gun?
Have Inception build you a custom gun.
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
RAW EMEK - MG100 FANG TRIGGER
Fits Planet Eclipse - EMEK and MG100
Select the finish below
Email me when Back-In-Stock
This is a RAW polished aluminum, fully adjustable trigger, with precision bearings and pin for the Planet Eclipse EMEK/MG100. This adds customization and trigger adjustability to the fantastic Emek/MG100 guns.
Adjustment screw for front-stop (to remove slack before the safety sets)
always make sure your safety is functional after adjusting (vertical screw)
Adjustment screw for trigger activation point (top screw on trigger blade)
Adjustment screw for rear trigger stop (bottom screw on trigger blade)
Polished and lightened trigger blade with no sharp edges
Slightly longer and flatter trigger than stock (more blade-like) for increased leverage and to make it easy for any finger placement to feel natural
Horizontally aligned adjustment screws so the force on the trigger pin is only pushing it backwards into the valve rather than down which prevents binding and makes the smoothest trigger pull possible
Precision knurled pin matched to bearings for easy install
RAW so you can have it anodized.
Comes with all screws and parts needed for assembly like the other FANG triggers - just not anodized.
Spring set available separately.
All raw aluminum parts should be anodized before use. We do not recommend using any raw aluminum parts before anodizing. Using raw parts before anodizing may void your warranty.
Fang Trigger Tuning
Fang Trigger Intro
EMEK/MG100 FANG ADJ. TRIGGER
Add a Review of this product.
Be the first to write a review »