Skip to content
Inception | Designs
Toggle mobile menu
BODY KITS / PARTS
BODY KIT WALL
LEGACY BODY KITS
PUMP / SNIPER
FLE HINGE FRAME
FLE SLIDE FRAMES
THE GUN WALL
BUILD YOUR OWN KITS
EMEK | MG100
EMEK | STANDARD
OILS AND LUBRICANTS
SEALANTS AND THREAD LOCKERS
PUMP ARMS FOR AUTOCOCKERS
PUMP ARMS FOR PUMP GUNS
HATS AND BEANIES
Want to build your own custom gun?
Have Inception build you a custom gun.
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
WGP Fighter Mini Body Kit (RAW)
This body is on the Inception RETRO Platform and takes an 11/16th valve
The weight of this body kit - 9.4 oz
lect finish below
This is the three piece Mini FLE body kit for the 2K+ Autococker and Sniper.
The main body
Front block with vertical integrated ASA
(also available separately).
This gun body is milled down in a faceted style and also perfectly matches the lines of all
at the bottom of the gun body. This body kit will work with most Autococker frames (including old school frames for WGP guns, electronic frames, and Inception frames).
The front block is design to fit all modern pneumatics, has an anti-rotation step to lock it into alignment, and a large bore transfer hole that is designed so the LPR can never block it if it is screwed in to far.
This has tumble raw finishing.
(must be anodized before use)
ADDITIONAL PARTS NEEDED:
It does not come with any of the screws or any other parts. We offer a
Master Screw Kit
You will need an
Empire™ Accessory Feedneck
to fit this body. (available separately)
This is on the WGP™ based platform and will require a
for this body are the old school screw-in style
WGP and Empire are licensed trademarks of G.I Sportz LLC.
"Full Body" Kryptonite Autococker/Sniper Body Kit - Vert Vertical ASA - Raw Aluminium
Extended Reach Kit (PB)
LPR O-ring rebuild kit
"Full Body" FLE Autococker/Sniper Body Kit - Vert Vertical ASA - Matte Black
Retro Hornet Mid Body Kit (MB)
Valve O-rings for 11/16ths lower bore guns
"Full Body" Kryptonite Autococker - Sniper - Body Kit - Vert - Vertical ASA - Matte Black
"Mid Block" FLE Autococker/Sniper Body Kit - Vert Vertical ASA - Raw Aluminium
Add a Review of this product.
Be the first to write a review »