HF - Valve V3.0 for 11/16ths Bore

11/16th Valve for Inception RETRO Autocockers and Pump Guns
Price: $59.99

: CGP-0063

This is a modern high flow and very rapid closing valve that is available as an upgrade for any gun with an 11/16ths bore and is the standard valve that comes in all 11/16ths lower bore guns from Inception.
Now updated with the V3.0 version we have further improved the internal porting for even better efficiency and consistency, and changed the sealing geometry so it seals up at even lower pressures!

We include the changes from V2.0 where we made the valve more stable in the bore of the body to prevent initial build leaks, improved the
valves ability to seal at lower pressures, improved the sealing reliability and ported the gas path through the valve to improve performance.
Designed for better flow with a reduced valve stem and the gas port on one side only to prevent flow disruption. The gas port is size matched to the flow hole through the gun body for the best gas flow path possible and ported at 45 degrees.
The valve has a fin stabilized molded cup seal for consistency and utilizes an o-ring sealed oversize stem that uses the pressure of the gas flowing through the valve to rapidly close the valve creating a much shorter and more consistent gas burst which in turn helps with efficiency, velocity consistency over the chronograph and helps make your gun as quiet as possible by reducing the wasted gas flow after the ball has already been accelerated.

Installing the Valve

Add a Review of this product. Be the first to write a review »