EMP NOS Delrin Trigger Upgrade
(NOS) New Old School

Untitled Document COMPATIBILITY:
This upgrade kit is for the Empire™Resurrection™ or Inception frames
* Empire Resurrection is a licensed trademark of G.I. Sportz

Price: $44.99

: IFP-1039

The following items are included in this package
This kit includes:

Empire™ Delrin Trigger Plate

This is a trigger plate for Empire Resurrection frames and Inception frames that are to be used with Empire Resurrection style body systems and front blocks (where the 3-way sits higher. This trigger plate has a shorter three way slot and uses a single ramp angle for the sear activation which makes the trigger pull lighter and smoother (not snappy) and is like the best old school custom trigger pulls of that style.

Trigger Return Spring Kit

This is a set of the spring used to push the trigger plate forwards and return the trigger to the resting location. For all Empire and Inception frames or any frame with a 0.1875" or wider trigger slot.
  • Trigger Return Springs, (Soft, Medium and Strong)
  • Trigger Return Spring Guide

Sear Spring Kit

This is the spring that goes under the back of the sear and pushes it up to engage it with the hammer lug.

  • Light
  • Medium Light
  • Medium
  • Heavy
On initial install we recommend using the medium trigger return spring and the medium light sear spring.

These are for Autocockers only. Using this trigger plate with a pump gun that has an Autotrigger will result in premature wear and is not covered by warranty.

Add a Review of this product. Be the first to write a review »