This low profile beavertail is designed to be as short as possible. It can be easily adjusted for length, can be locked down to prevent it slipping via the rear set screw and can be used for all full body* (guns with back blocks) Autocockers and Snipers to prevent thumbing of the cocking rod and to prevent the back block from smacking the user in the face during use :)

Comes with a stainless steel shaft, angled rear section in polished black and stainless steel locking set screw.

If you need to further lengthen the beavertail in an Inception frame we recommend the use of our "Back Block and Mid Block locking screws" screw set available separately. Install the set screw of your choice into the frame first and then screw in the beavertail rod behind it.

The Beavertail comes with a mounting block for mounting onto old school guns that aren't using an Inception frame. (Beavertail is sold separately without the mounting block to install onto an Inception Frame).