Build Your Own
Inception | Designs
Build Your Own
Autococker & Sniper Parts
ASA's (Air System Adapters)
ASA's and Rails
EZ ASA and ATR (Adjustable T-slot Rail) Combo
Select the finish below
This is a combination pack including an EZ ASA and an ATR (Adjustable T-slot Rail).
The EZ ASA is the latest in Air Systems Adapter (ASA) designs, using a cam based action to ensure easy gassing up of your paintball guns even those using high pressure tanks and ball valves that can be very difficult to gas up with other systems.
Push button gas release drops the lever and auto bleeds the gas from the ASA.
Comes with 1/4" macro hose fitting* and two set screws for attaching to the bottom of your grip frame.
Fit all guns that come with a t-slot rail system (Planet Eclipse, Empire, Inception and others) and all guns with bottom line screw locations via the use of our adapter rail (sold separately) that attaches to standard bottom line screw locations in up to 6 different positions.
*Macro fitting style/manufacturer may change subject to availability. Uses 1/8th NPT threaded fittings.
The Inception ATR (Adjustable T-slot Rail) is the lowest profile rail available for mounting T-Slot ASA's to the original 10-32 bottom line screw locations used on most classic paintball guns.
The ATR and also has the greatest range of adjustment. The Rail has 5 holes underneath to allow for 3 mounting positions and since the holes are offset to one end you can then spin it around to get another 3 different adjustments for 6 positions in total. The ASA is then locked to the rail with it's mounting set screws allowing even further adjustment.
The ATR was specifically designed to match perfectly with the Inception EZ ASA (sold separately and as a combo pack) but also works with all Planet Eclipse ASA's that mount to a T-slot rail system and use locking screws from underneath such as the OOPS and POPS ASA.
Comes with low profile stainless steel mounting screws for attaching to the gun's grip frame.
IT DOES NOT COME WITH THE GRIP FRAME OR ANYTHING ELSE PICTURED UNLESS SPECIFIED ABOVE.
RAW/UNANODIZED PARTS MUST BE ANODIZED BEFORE USE. Using RAW parts or assembling them without anodizing immediately VOIDS all warranty. RAW Parts are provided only for custom anodizing and not to provide a "silver" finish.
T-Slot mounting set screws
EZ ASA T-slot Rail (ATR) Combo (PB)
Starburst ASA Plug
ATR - Adj. T-slot Rail (PB)
Straight Macro Fitting with Teflon Seal
Add a Review of this product.
Be the first to write a review »