Digital EZ Pressure Tester
EZ PRESSURE TESTER


 
Alternative Views:
Price: $109.99



: CGP-0165
Qty:

Description
 
EZ Pressure Tester for paintball marker tanks and HPR's outputting up to 1400psi. The gauge will work up to 5000psi.

Use it to set your output pressure and to check for performance to ensure that the regulator isn't creeping (which can be very bad for a paintball gun and damage seals/solenoids inside the gun).

Easy "EZ" operation. Make sure the digital gauge is turned on then simply screw tank or HPR into the bottom of the tester and then close the side lever. Pressure will read on the gauge immediately with your tank. With an HPR you need to turn on the air supply to the HPR. Press the button to release the lever and degas the pressure gauge. Repeat to check for consistency or leave it pressurized and watch the gauge to make sure the pressure isn't slowly increasing (creep).

The gauge is not as "dynamic" as a analogue gauge so if you want to see how fast your tank gets to the set pressure we recommend a different analogue gauge.

Designed to use the minimum amount of air from your tank as possible so you don't waste air/gas while testing and setting up your equipment at home.

Compatible with low pressure adapter to check the pressure from low pressure hoses found on guns such as Autocockers and Intimidators to verify LPR performance. This will come with the low pressure adapter.

Included in this item are

EZ Pressure tester with Digital gauge.
Low Pressure adapter with 1/16 hose barb

It does not include low pressure hose.

Full set for testing Autocockers, that includes the Low Pressure Adapter and a low pressure gauge can be found here.

Extra pressure gauges available also here.

Pressure gauge style may vary from shown.
Features
  • Push button EZ Pressure Tester with 0-1400PSI Gauge

Add a Review of this product. Be the first to write a review »